Fluke 5700A Multifunction Calibrator
Ranges:
• DC voltage to 1100 V
• AC voltage to 1100 V, with output available from 10 Hz to 1 MHz
• AC and DC current to 2.2 A, with output available from 10 Hz to 10 kHz
• Resistance in values of 1x10n and 1.9x10n from 1 O to 100 MO, plus a short
• Option 03: Wideband AC voltage from 300 µV to 3.5 V into 50 O (-57 dBm to +24 dBm), 10 Hz to 30 MHz
Features:
• Internal environmentally-controlled references allowing the calibrator to maintain full performance over a wide ambient temperature range
• Automatic meter error calculation obtained through using a simple output adjust knob; the display shows linearity, offset, and scale errors
• Keys that multiply and divide the output value by 10 to simplify work on meters with calibration points at decade multiples of a fraction of full-scale
• Programmable entry limits used for restricting the levels that can be keyed into the calibrator, preventing access to levels that may be harmful to equipment or personnel
• An auxiliary current binding post that allows you to calibrate meters with separate current inputs without moving cables
• Real-time clock and calendar for date stamping reports
• Offset and scaling modes that simplify linearity testing of multimeters
• Variable phase reference signal output and phase-lock input
• Interface for the Fluke 5725A Amplifier
• IEEE-488 (GPIB) interface
• Selectable normal remote mode or emulation of the Fluke 5100B and 5200A Series calibrators in functions and response to system controller software
• RS-232C serial data interface for printing, displaying, or transferring internally-stored calibration constants, and for remote control of the calibrator
• A traceable calibration procedure for all modes and ranges that requires only 10 V, 1 O, and 10 kO external standards, with only occasional independent verification
Price: £38,930.00 (Excluding: VAT at 20%)
Quantity:
|  |  |
