Your Cart ×

You have no items in your shopping cart.

Insulation and Continuity Testers

Insulation and Continuity Testers

List Grid

per page
  1. Megger MIT230 - Pocket Sized Insulation and Continuity Testers

    £405.00

    The MIT200 series will find applications in electrical contracting, both on domestic and industrial systems, as well as site maintenance and service departments.

  2. Megger RCDT310 - Residual Current Device Testers

    £425.00

    The low-cost entry-level RCDT310 model is suitable for use on supplies between 100V and 280V, and offers 0.5I, I and 5I tests, with provision for tests starting at 0°/180° of the supply waveform, as well as for DC tests.

  3. Megger RCDT320 - Residual Current Device Testers

    £490.00

    The mid-range RCDT320 covers a wider supply voltage range of 50V to 290V, allowing use with centre-tapped 110V supplies.

  4. Megger RCDT330 - Residual Current Device Testers

    £535.00

    The operating current range of the RCDT320 is extended to cover 10mA to 1,000mA devices, and the ability to measure AC supply voltage and frequency is added

  5. Megger LTW335 - 2 Wire Non-Tripping Loop Impedance Testers

    £740.00

    The Megger LTW335 offers a 2 wire loop testing solution that does not trip 30 mA RCDs and can be used on a wide range of voltages.

  6. Megger LTW325 - 2 Wire Non-Tripping Loop Impedance Testers

    £575.00

    • 2 Wire Non-tripping loop tester • 50 V to 440 V operation • 110 V centre-tap loop testing • CATIV installation testing • AUTO start - operation • 0.001 ohm resolution (LTW425)

  7. Fluke 1503 Insulation Tester

    £329.00

    Insulation Tester Insulation Test: 0.1 MOhm to 2 GOhm Insulation Test Voltage: 500 V, 1000 V

  8. Fluke 1507 Insulation Tester

    Regular Price: £429.00

    On Sale £329.00

    • Insulation Tester Insulation
    • Test range: 0.01 MO to 10 GO Insulation
    • Test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V

    ++ SPECIAL PRICE: Get the Fluke 1507 at the price of a Fluke 1503 Insulation Resistance Tester - Offer Ends 31st December 2019 ++

  9. Megger LRCD210 - Combined Loop and RCD Testers

    £605.00

    Megger LRCD210 provides three phase safe non-trip loop testing and 1/2I, I, and 5I RCD testing for standard, selective and DC RCDs. Suitable for domestic installers testing to UK Part P requirements.

  10. Megger LRCD220 - Combined Loop and RCD Testers

    £710.00

    The LRCD200 series tester combines an Earth loop impedance tester with an RCD tester.

  11. Megger LTW315 - 2 Wire Non-Tripping Loop Impedance Testers

    £555.00

    • 2 Wire Non-tripping loop tester • 50 V to 440 V operation • 110 V centre-tap loop testing • CATIV installation testing • AUTO start - operation • 0.001 ohm resolution (LTW425)

List Grid

per page