Binder FP Series Material Test Chambers
Availability:
In Stock / Short Lead Time
Material test chamber (oven) with mechanical convection A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating – even for chambers under full loads.
BINDER FP Series Material Test Chambers.
Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results.
The reliable BINDER FP models are available with internal capacities ranging from 53 - 720 litres. BINDER FP Features Include:- Temperature range from 5 °C above ambient temperature to 300 °C
- MP controller with 2 programs with 10 sections each, or alternatively 1 program with 20 sections
- The time of an individual program step can be set to max. 99.59 hours or 999.59 hours. This adjustment applies to all program sections
- Integrated weekly program timer with real-time function
- Adjustable ramp function via program editor
- Digital temperature setting with an accuracy of one degree
- Adjustable fan speed
- Adjustable ventilation by means of front ventilation flap slide and rear exhaust Ø 50 mm
- Elapsed time indicator
- Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
- RS 422 interface for use with APT-COM™ DataControlSystem communication software or switch over to printer output with RS 232 / RS 422 interface converter
- Units up to 115 liters are stackable
- 2 chrome-plated racks included
- BINDER test confirmation
FP Series | |
---|---|
Access ports with silicone plug, 10, 30, 50, 100 mm | O |
HEPA fresh-air filter, Class H 14 (according to EN 1822, min. 99.999% for 0.3 μm particles) | O |
Securing elements for additional fastening of racks (1 set of 4 pieces) | O |
Anti-slip rubber pads for safe stacking (1 set of 4 pieces) | O |
Measurement of air exchange rate according to ASTM D5374, with definition and protocol according to ambient temperature (measurement in factory) | O |
Temperature measurement acc. to DIN 12880 (27 measuring points) at 150 °C or at specified temperature with measuring protocol and certificate | O |
Factory calibration certificate, measurement in center of chamber at 150 °C or at specified testing temperature | O |
Extension to factory calibration certificate. Each additional measurement at additional measuring point or testing temperature | O |
Additional measuring channel for digital display of specimen temperature with flexible PT 100 temperature sensor, measured data recorded via RS 422 interface | O |
Independent temperature safety device class 3.1 (DIN 12880) with optical alarm | O |
Analog temperature output, 4 - 20 mA with 6-pin DIN socket (output not adjustable) | O |
Zero-voltage relay outputs accessible via 6-pin DIN socket. Additional module for controlling 2 relay outputs via 2 of the programmable controller's contacts. Zero-voltage relay outputs can be switched on and off either automatically and manually | O |
Data Logger Kit T 350: For continuous temperature recording of 0 °C to 350 °C. Kit includes 1 data logger, PT 100 sensor with 2 m Teflon extension cable and 1 fixture for mounting to the BINDER unit | O |
Data Logger converter cabel RS 232 to USB 2.0 | O |
Data Logger Software: Configuration and evaluation software for all BINDER Data Logger Kits, incl. data cable | O |
Rack, chrome-plated | O |
Rack, stainless steel | O |
Shelf, perforated, stainless steel | O |
Locking door handle with key | O |
Door gasket, FKM (Viton) | O |
Inert gas connection (gas inlet and outlet; Ø 10 mm).We also recommend the mostly gas-tight version option | O |
Mostly gas-tight version | O |
Door with window 230 x 230 mm and interior lighting (15 W) | O |
Increased air-exchange rate through high-performance fan | O |