Binder MKF Series Dynamic Climate Chambers

Availability: In Stock / Short Lead Time

Environmental simulation chamber for complex alternating climate profiles

A BINDER environmental simulation chamber of the MKF series is ideally suited for any cold and heat testing based on current temperature and climate testing testing methods according to DIN and IEC standards. The ease of operation and comprehensive standard equipment for this environmental simulation chamber ensures something special in use.

BINDER MKF Series Dynamic Climate Chambers.

Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results.

BINDER MKF Series models are available with internal capacities ranging from 115 - 720 litres. Key Features:
  • Temperature range without humidity: -40 °C to 180 °C (-40 °F to 356 °F)
  • Temperature range with humidity: 10 °C to 95 °C (50 °F to 203 °F)
  • Humidity range 10 % to 98 % RH
  • MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
  • User-friendly LCD screen
  • Integrated electronic chart recorder
  • Variety of options for the graphic display of process parameters
  • Real-time clock
  • Electronically controlled humidification and dehumidification system with capacitive humidity sensor and vapor pressure humidification
  • Integrated water storage tank
  • Heated viewing window with interior lighting
  • Programmable condensation protection for test material
  • Adjustable ramp function via program editor
  • 230 V power socket on the right-side operating panel
  • Independent adjustable temperature safety device Class 2 (DIN 12880) with visual and audible temperature alarm
  • 4 potential-free relay outputs that can be activated via MCS controller
  • Ethernet interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM™ DataControlSystem software
  • BINDER Communication software APT-COM™ 3 Basic Edition
  • Access port Ø 50 mm (2 inch), left side
  • 4 casters (2 with brakes)
  • Stainless steel rack included
  • BINDER test confirmation
BINDER MKF Series: Options available include:
BINDER MKF Series
Access ports with silicone plug, 30 mm (1.2 inch), 50 mm (2 inch), 80 mm (3.1 inch), 100 mm (3.9 inch), 125 mm (4.7 inch) O
Analog output for temperature 4 - 20 mA with 6-pin DIN socket (output not adjustable) O
Securing elements for additional fastening of racks (1 set of 4) O
Door lock O
Additional measuring channel for digital display of specimen temperature with flexible PT 100 temperature sensor. Measuring data recorded through device interface O
Temperature safety device for over and under temperature, Class 2 O
RS 422 interface O
Temperature measurement acc. to DIN 12880-2 and 9-point humidity measurement/factory standard with protocol and certificate at 25 °C (77 °F) / 60% RH or at specified values O
Calibration certificate for temperature and humidity. Measurement in center of chamber at 25 °C (77 °F) / 60% RH or at specified values O
Extension to calibration certificate for temperature and humidity. Each additional measurement at an additional measuring point or set of values O
BINDER PURE AQUA SERVICE O
Single-use cartridge for BINDER PURE AQUA SERVICE O
Water circle, possibility to reuse water O
Data Logger Kit TH 100/70: With two attachable combined sensors for temperature and humidity recording O
Data Logger Kit TH 100: With one attachable combined sensor for temperature and humidity recording O
Data Logger Kit TH 220: With PT 100 sensor for temperature recording O
Data Logger Software O
Data Logger converter cable (RS 232 to USB 2.0) O
Rack, stainless steel O
Reinforced rack, stainless steel, with 1 set of fasteners (4 pieces), max. load 70 kg (154 lbs.) O
Perforated shelf, stainless steel O
Notch-type access port in door, 100 x 35 mm (3.9 x 1.4 inch) O
Unregulated compressed air-dryer O