Martindale TEK500 Microwave Leakage Detector Kit

The Martindale TEK500 is a straightforward microwave leakage detector, which gives a simple LED indication as to leakage levels and is suitable for use with both commercial and domestic microwave ovens. The unit is designed to comply with national standards on permitted exposure levels. A self test feature simulates a real microwave input, in order to ensure the unit is working correctly at all times and the leakage tester will indicate at 1, 5 and 10mW/cm2, testing to BS5175. The test procedure for microwave ovens also includes checking that the microwave is heating correctly. The TEK500 includes a beaker and digital thermometer in order for these tests to be carried out and to ensure your compliance with the testing requirements. The Martindale TEK500 microwave leakage detector kit is supplied with the leakage detector, beaker, digital thermometer, carry case & instruction manual. The manual also includes the calculations to apply when measuring the microwave output. Specification • Detection Frequency Range • 2450MHz +/-25MHz • Sensor Distance Fixed cone on rear of unit should be in gentle contact for standard 50mm separation Indicators Test Position All four LEDs should light and an audible tone will be emitted On Position PASS: Green "sys" LED only (<1mW per cm2 Green "sys" LED & yellow "1mW" LED (<5mW per cm2 FAIL: Red "5mW" LED (>5mW per cm2, audible tone Red "10mW" LED (>10mW per cm2, audible tone General Specifications Supply: 9V alkaline battery, PP3 / MN1604 or equivalent Dimensions: 150 x 64 x 30mm Weight: 170g approx Supplied with digital thermometer, water beaker, carry case, battery & instruction manual