Vermason Digital Surface Resistance Meter Kit

222642 Features • NEW Enclosure with Rubber Grip Edges Thinner and narrower design is easier to hold and provides protection from drops. • NEW Quick Check Button Enable this switch to perform quick resistance measurements without the 15-second period for temperature and humidity measurements. • NEW Battery Compartment Easy-to-access compartment without the need for tooling or probes. • Digital Compliance Verification Surface Resistance Meter Kit* Measures resistance point-to-point(Rtt) or surface to ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and other documents. • Resistance Range: Greater Than 1.0 x 103 ohms to Less Than 1.0 x 1012 (+/-10% Accuracy) Determines if a surface is dissipative, conductive, or insulative for ESD control applications in electronics manufacturing or handling environments. • Under Load Test Voltages (10V or 100V ±5%) Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification. • Selectable Test Voltage Switches to appropriate test voltage (10V for tests <1 x 106 or 100V for tests >1 x 106) in AUTO mode or may be fixed to at 10V in HOLD mode. • Ohm Values are Expressed with a Digital Mantissa and LED Exponent Provides an easy to read and accurate measurement. • Pre-set 15 Second Electrification Period in Full Test Mode Meets the requirements of the ANSI/ESD S4.1 testing requirements. • Temperature (Fahrenheit and Celsius) and Relative Humidity Measurements Measures temperature and relative humidity (during 15 second electrification period) as required by ANSI/ESD S20.20. • NIST Calibrated with Certificate Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of Vermason products, see Calibration. • Prior item number: 222630 • Made in the United States of America *222642 Digital Surface Resistance Meter Kit Includes • 1 Digital Surface Resistance Meter • 2 Shielded Test Leads, 1.5m Length • 2 Five Pound Electrodes • 2 AA Alkaline Batteries • 1 Gator Clip • 1 Plastic Carrying Case • 1 Certificate of Calibration