Vermason Digital Surface Resistance Meter

Availability: Normally in Stock / Short Lead Time
£1,573.26
  • NEW large OLED display
    Displays resistance mantissa and exponent, temperature, relative humidity and test voltage
  • NEW internal memory
    Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity and test voltage
  • NEW measurement stability modes
    Sets the 15-second electrification period for test requirements

19291 Features 

  • NEW large OLED display
    Displays resistance mantissa and exponent, temperature, relative humidity and test voltage
  • NEW internal memory
    Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity and test voltage
  • NEW measurement stability modes
    Sets the 15-second electrification period for test requirements*
  • NEW electrode spacers
    Spaces the 2.27 kg electrodes to 25 and 91 cm for resistance point-to-point (Rtt) measurement requirements of IEC 61340-2-3 and IEC 61340-4-1
  • NEW measurement location labels (pack of 25)
    Labels and tracks areas and materials measured for surface resistance
  • Digital compliance verification surface resistance meter kit
    Measures resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with IEC 61340-2-3 and IEC 61340-5-1
  • Resistance range: <1.0 x 103 to >1.0 x 1012 Ohms
    Determines if a surface is conductive, dissipative or insulative for ESD control applications in electronics manufacturing or handling environments
  • Under load test voltages (10 V or 100 V ±5 %)
    Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification
  • 222002 Concentric Ring Probe Accessory 
    Measures surface resistance per IEC 61340-2-3, the test method listed in Packaging Table 3 in EN 61340-5-1
  • NEW 19295 handheld Electrode Accessory
    Meets resistance measurement requirements of IEC 61340-2-3, IEC 61340-4-1, ANSI/ESD STM2.1 and IEC 61340-4-5
  • NIST calibrated with certificate included
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. 

*Measurement stability modes:
Auto stabilisation enables a 15-second electrification period when the measured resistance is 1 x 1010 ohms or greater to maintain test accuracy.

Fixed stabilisation complies with ANSI/ESD S4.1 and enables a 15-second electrification period when the measured resistance is 1 x 106 ohms or greater.