Beha-Amprobe 2100-GAMMA PRO Electric Tester Kit

Availability: In Stock / Short Lead Time

Beha Amprobe 2100-GAMMA PRO is a new kit that contains:

• The (existing) 2100-GAMMA voltage tester
• 2100-ACCs Probe test probe extenders
• CC-2100 holster

A 2100-Gamma voltage tester with test probe extenders and a holster

Allow you to do voltage measurement in tight spaces and on hard to access parts
The extenders ensure reliable contact without compromising safety.
Safety requirements for electrical switchboards are getting more rigorous and electrical parts are increasingly protected by covers to ensure they won’t be accidentally touched. With the 2100-
GAMMA PRO the job can be done safely and easily. The test probe extenders are specially designed to allow measurement at fuse switch disconnectors and busbars inside switchboards with isolators and isolation switches.
Fits on the Beha-Amprobe 2100 Voltage Testers Series and the FLUKE T90 / 110 / 130 / 150
With thread (M3) for fast connection and reliable contact

Operation Time (DT): 30 s
Recovery Time: 240 s
Operating Temperature: -15 °C to +55 °C
Storage Temperature: -15 °C to +55 °C
Humidity: Max. 95 % RH
Operating Altitude: Up to 2000 m
Safety Rating (measurement category): CAT IV 600 V, CAT III 1000 V
Pollution Degree: 2
Protection Degree: IP 64
Safety Regulations: IEC 61243-3:2014, EN 61243-3:2014, DIN VDE 0682-401:2015
Approvals, Compliance: GS mark from TUV Rheinland, CE
Power Supply Battery: 2 x 1.5 V (AAA/ IEC LR03)
Power Consumption: Approximately 90 mA
Battery Lifetime: More than 10000 measurements (<5 s / per measurement)
Dimensions (H x W x D): Approximately 280 x 78 x 35 mm (11.0 x 3.1 x 1.4 in)
Weight: Approximately 320 g (0.71 lb)

Designed for: Beha-Amprobe 2100-Alpha/Beta/Gamma/Deltaand Fluke T90/T110, T130 and T150
Operating Voltage / Safety Rating: CAT IV 1000 V AC/DC / CAT III 1500 V DC
Operating Current: max. 1 A
Safety Regulations: IEC 61010-031
Protection Degree: Protection Degree
Pollution Degree: 2
Diameter of Metal Tip: 2mm
Length of Metal Tip: 3.5mm
Distance from Tip to Fingerguard (probe length): 102mm
Connection: Thread M3
Temperature Range: -15 °C to 55 °C
Humidity: max. 95 % RH
Operating Altitude: Up to 2000 m
Dimensions: Approx. 133 x 22 mm
Weight: Approx. 6 g