Fluke 772

Milliamp Clamp Meters Milliamp process clamp meters can measure mA signals without breaking the loop. The Fluke 772 mA Clamp Meter expand upon the capabilities of the popular 771 mA Clamp Meter, adding loop power and mA sourcing to the troubleshooting and process calibration capabilities in all Fluke mA clamp meters. Features: • Best in class 0.2 % accuracy • 0.01 mA resolution and sensitivity • Measure 4 to 20 mA signals without ”breaking the loop” • Measure mA signals for PLC and control system analog I/O • Dual backlit display with both mA measurement and percent of 4 to 20 mA span • Measurement Spotlight illuminates hard to see wires in dark enclosures • Detachable clamp with extension cable for measurements in tight locations • Measure 10 to 50 mA signals in older control systems using the 99.9 mA range • Automatically change the 4 to 20 mA output for remote testing • Power saving features, auto-off, backlight timeout extend battery life • Hold function captures and displays changing measurements • Measure 4 to 20 mA signals with in-circuit measurement • Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters • Source 4 to 20 mA signals for testing control system I/O or I/Ps • mA output linear ramp or 25% step output • Automatically change the 4 to 20 mA output for remote testing Included accessories: • Four AA alkaline batteries (installed) • Soft carrying case • TL75 test leads • AC 72 detachable clip • TL 940 mini hook test leads • Instruction sheet • Hanging tool with hook and loop strap