GW Instek PEL-5000G Series High Power DC Electronic Load
GW Instek range of single-channel electronic loads provides 150V/600V/1200V models in the PEL-5000G range.
The series has 9 models featuring different combinations of power, voltage and current to match your specifications. The range is ideal for testing electric vehicles, chargers, charging points and batteries.
For expert advice and pricing, get in touch at +44 (0) 800 583 4455 or sales@sjelectronics.co.uk
The PEL-5000G range is a single-channel, programmable DC electronic load with 9 models to choose from.
The range supports parallel connections for the same voltage
PEL-5000G Series High Power DC Electronic Load
Product overview
The GW Instek PEL-5000G series consists of single-channel electronic loads that come in 150V, 600V, and 1200V configurations, offering a power range between 4kW and 6kW. Within the PEL-5000G series, there are a total of 9 models that vary in power, voltage, and current combinations. These electronic loads are designed to test and verify the specifications of batteries, electric vehicle chargers/charging stations, and electric vehicle batteries. The PEL-5000G supports parallel connection for units with the same voltage but different power models. By connecting up to 8 units in parallel, a maximum power output of 48kW can be achieved.
HIGHLIGHTS
-
Simultaneously display voltage, current and watts
- 5-digit digital display showing voltage, current and power
- Designed to streamline data monitoring
-
150V, 600V, 1200V models
- Ideal for high-power equipment and power factor regulator (PFC) testing
- Cover a wide range of voltage options, including high-voltage capabilities up to 1200V, to meet diverse testing requirements for high-power equipment
-
Parallel function support up to 48kW
- Operate up to 8 units of master/slave parallel control
- Parallel operations are perfect for when your power capacity requirements exceed your base equipment
Other Advanced Features
- Parallel operation functions are not limited to CC, CR, and CP modes; CV mode also supports parallel operation functions
- Surge Test mode is designed for conducting current rising transient tests for capacitive loads.
- Optional interfaces available for connectivity include GPIB, RS232, USB, and LAN.
- SEQ Load Mode's programmable function allows for ultra-high-speed step changes from 0.02 to 999000 ms in CC or CP mode
- Provide battery BMS protection test function
- Turbo mode can withstand up to 1.5 times the current and power electronic load within 2 sec. period, most fit BMS, Short circuit, OCP, OPP test
- Protection against V, I, W, and ℃
For expert advice and pricing, please contact us at +44 (0) 800 583 4455 or sales@sjelectronics.co.uk