N9355G Power limiter, 0.01 to 54 GHz

Availability: Normally in Stock / Short Lead Time
£2,383.00

The Keysight N9355G is a wideband 10 MHz to 54 GHz limiter that comes with a power limiting threshold of 23 dBm. It is furnished with a high-quality male and female 1.85 mm connector on each side.

N9355G Power limiter, 0.01 to 54 GHz

Key Features

  • Broad frequency range up to 54 GHz maximizes the operating range of your
    instrument
  • High power protection prevents damage by undesired ESD and excess RF power  Exceptional return loss improves calibration accuracy
  • Low insertion loss maximizes available power
  • Bi-directional utilization eliminates orientation errors
  • Integrated DC block provides protection from DC transient

Description

N935x Series of high-performance power limiters are designed for high volume manufacturers and R&D sectors in telecommunications, component test, and aerospace/ defense industries. Keysight Technologies power limiters provide the best broadband input protection from excess RF power, DC transients and ESD, for a variety of RF and microwave instruments and components. For example, the input circuitry of spectrum analyzers, network analyzers, frequency counters or amplifiers can be protected from unintentional inputs up to 3 watts average power. At even greater power levels, failure mode for the limiter is either an open circuit or a short circuit to ground, thereby protecting the instrument from damage.

N9355G

The Keysight N9355G is a wideband 10 MHz to 54 GHz limiter that comes with a power limiting threshold of 23 dBm. It is furnished with a high-quality male and female 1.85 mm connector on each side.

Application

Our limiters offer superb low insertion loss and linear operation at low input levels while providing protection against transients or short duration overloads. 

Keysight limiters also include a DC block integrated into both input and output ports that will block signals below 10 MHz and pass signals up to 54 GHz.

Accessories