Your Cart ×

You have no items in your shopping cart.

  • Home
  • Tektronix TIVM02L IsoVu Isolated Measurement System (Discontinued)

Tektronix TIVM02L IsoVu Isolated Measurement System (Discontinued)

Availability: Out of stock

Tektronix IsoVu 200 MHz Medium Voltage with 10 m cable
(Discontinued) - Please contact us at or 0800 583 4455 for alternatives.

Tektronix IsoVu 200 MHz Medium Voltage with 10 m cable

The Tektronix TIVM Series IsoVu™ Measurement System offers a galvanically isolated measurement solution for accurately resolving high bandwidth, differential signals up to ±50 Vpk in the presence of large common mode voltages with the best in class common mode rejection performance across its bandwidth.

The TIVM Series (IsoVu) products can be used on most Tektronix oscilloscopes with the TekVPI interface and on MSO/DPO70K series oscilloscopes with the TCA-VPI50 adapter. IsoVu utilizes an electro-optic sensor that converts the electrical signal from the sensor tip cables to an optical signal, which electrically isolates the device-under-test from the oscilloscope. IsoVu incorporates four separate lasers, an optical sensor, five optical fibers, and sophisticated feedback and control techniques. The sensor head, which connects to the test point, has complete electrical isolation and is powered over one of the optical fibers (No batteries required). IsoVu is an ideal solution for users making the following measurements:

  • Differential measurements in the following conditions:
    • Complete galvanic isolation is required
    • High common mode voltage
    • High frequency common mode interference
    • High frequency measurements
  • Measurements in high
  • EMI environments
  • EMI compliance testing
  • ESD testing

Tektronix TIVM Series IsoVu™ Series Feauters and Benefits

  • Bandwidths from DC to 1 GHz
  • 1 Million to 1 (120 dB) Common Mode Rejection up to 100 MHz
  • 10,000 to 1 (80 dB) Common Mode Rejection at 1 GHz
  • 2,000 V Common Mode Voltage
  • Up to ±50 V Differential (DC + pk AC)
  • Output Clamping
  • Safety Certified

The measurement system can be used with the following Tektronix oscilloscopes. For oscilloscopes not included in this list, contact us.

  • MDO3000 series
  • MSO/DPO4000B series
  • MDO4000B/C series
  • MSO/DPO5000B series
  • DPO7000C series

In addition to the above oscilloscopes, the measurement system can also be used with the following oscilloscopes with a TCA-VPI50 adapter.

  • MSO/DPO70000C series
  • MSO/DPO70000DX series
  • DPO70000SX series

Case Study: Tektronix IsoVu Measurement Systems Helps Panasonic Semiconductor Solutions Significantly Shorten Development Time for New GaN Device >

  • Half/Full Bridge designs using GaN, SiC, IGBTs

  • Floating Measurements

  • Power Converter Design

  • Power Device Evaluation

  • Switching Power Supply Design

  • Inverter Design

  • Motor Drive Design

  • Electronic Ballast Design

  • EMI

  • ESD

  • Current shunt measurements

  • Remote probing capability