Keithley 2460 Touchscreen Source Meter - SMU Instrument
- Interactive Digital SourceMeter
- 6½-digit resolution precision source and measure
- Max Current: 7A DC
- Max Voltage: 100V
- DC Power: 100W
- Wideband Noise: 2mVrms typ.
- Sweep Types: Linear, Log, Dual Linear, Dual Log, Custom
For newer applications, Keithley recommends the 2450, 2460 and the 2461 SMU.
The Model 2460 High Current SourceMeter® Source Measure Unit (SMU) Instrument brings advanced Touch, Test, Invent® technology right to your fingertips. It combines an innovative graphical user interface (GUI) with capacitive touchscreen technology to make testing intuitive and minimize the learning curve to help engineers and scientists learn faster, work smarter, and invent easier. With its 7A DC and pulse current capability, the Model 2460 is optimized for characterizing and testing high power materials, devices, and modules such as silicon carbide (SiC), gallium nitride (GaN), DC-DC converters, power MOSFETs, solar cells and panels, LEDs and lighting systems, electrochemical cells and batteries, and much more.
These new capabilities, combined with Keithley’s decades of expertise in developing high precision, high accuracy SMU instruments, will make the Model 2460 a “go-to instrument” for high current applications in the lab and in the rack for years to come.
Learn Faster, Work Smarter, Invent Easier
The Model 2460 features a five-inch, full-color, high resolution touchscreen that supports intuitive operation, helps operators become familiar with the instrument quickly, and optimizes overall speed and productivity. A simple icon-based menu structure reduces the number of steps required to configure a test by as much as 50 percent and eliminates the cumbersome multi-layer menu structures typically used on soft-key instruments. Built-in, context-sensitive help supports intuitive operation and minimizes the need to review a separate manual.
These capabilities, combined with the Model 2460’s high versatility, simplify its operation in both basic and advanced measurement applications, regardless of the user’s previous experience in working with SMU instruments.
Key Specification:
- One tightly coupled instrument that combines capabilities from analyzers, curve tracers, and I-V systems at a fraction of their cost
- Wide coverage up to 105V, 7A DC/7A pulse, 100W max.
- Five-inch, high resolution capacitive touchscreen GUI
- 0.012% basic measure accuracy with 6½-digit resolution
- Source and sink (4-quadrant) operation
- Four “Quickset” modes for fast setup and measurements
- Context-sensitive help function
- Front panel input banana jacks; rear panel input mass termination screw connections
- 2460 SCPI and TSP® scripting programming modes
- Front-panel USB 2.0 memory I/O port for transferring data, test scripts, or test configurations
Accessories Supplied:
- 2460-KIT - Rear Panel Mating Mass Terminated Screw Connector
- 8608 - High Performance Test Leads
- USB-B-1 - USB Cable, Type A to Type B, 1m (3.3 ft)
- CS-1616-3 - Safety Interlock Mating Connector
- CA-180-3A - TSP-Link/Ethernet Cable
- Documentation CD
- 2460 QuickStart Guide
- Test Script Builder Software
- KickStart Startup Software
- LabVIEW and IVI Drivers
TEST LEADS AND PROBES | ||||
Data Sheet | Accessory | Description | Ships in the box with | Works with |
1754 | 2-wire Universal 10-Piece Test Lead Kit | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
5804 | Kelvin (4-Wire) Universal 10-Piece Test Lead Kit | – | 2450, 2400, 2401, 2410, 2420, 2440 | |
5805 | Kelvin (4-Wire) Spring-Loaded Probes | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
5806 | Kelvin Clip Lead Set | – | 2450, 2400, 2401, 2410, 2420, 2440 | |
5808 | Low Cost Single-pin Kelvin Probe Set | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
5809 | Low Cost Kelvin Clip Lead Set | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
8605 | High Performance Modular Test Leads | 2400, 2401, 2410, 2420, 2440 | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
8606 | High Performance Modular Probe Kit | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
8607 | 2-Wire, 1000V Banana Cables, 1m (3.3ft) | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
8608 | High Performance Clip Lead Set | 2450, 2460, 2461 | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 |
CABLES, CONNECTORS, ADAPTERS | ||||
Data Sheet | Accessory | Description | Ships in the box with | Works with |
237-ALG-2 | 3-slot Male Triax Connector to 3 Alligator Clips | – | 2450 | |
237-BAN-3A | Triax to Banana Plug | – | 2450 | |
2450-TRX-BAN | Triax to Banana Adapter. Converts the 4 Triax adapters on the rear panel to 5 banana jacks | – | 2450 | |
2460-BAN | Screw Terminal Connector to Banana Cable | – | 2460, 2461 | |
2460-KIT | Mating Mass Termination Connector | 2460, 2461 | 2460, 2461 | |
7078-TRX-* | 3-slot, Low Noise Triax Cable | – | 2450 | |
7078-TRX-GND | 3-slot Male Triax To BNC Adapter (guard removed) | – | 2450 | |
8607 | 2-wire, 1000V Banana Cables, 1m (3.3 ft) | – | 2450, 2460, 2461 | |
CA-18-1 | Shielded Dual Banana Cable, 1.2m (4 ft) | – | 2450, 2400, 2401, 2410, 2420, 2440 | |
CAP-31 | Protective Shield/Cap for 3-lug Triax Connectors | 2450 | ||
CS-1546 | Triax 3-lug Special Shorting Plug. Shorts center pin to outer shield | 2450 | ||
CS-1616-3 | Safety Interlock Mating Connector | 2450, 2460, 2461 | 2450, 2460, 2461 |
COMMUNICATION INTERFACES & CABLES | ||||
Data Sheet | Accessory | Description | Ships in the box with | Works with |
KPCI-488LPA | IEEE-488 Interface for PCI Bus | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
KUSB-488B | IEEE-488 USB-to-GPIB Interface Adapter | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
7007-1 | Shielded GPIB Cable, 1m (3.3 ft) | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
7007-2 | Shielded GPIB Cable, 1m (6.6 ft) | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
CA-180-3A | CAT5 Crossover Cable for TSP-Link/Ethernet | 2450, 2460, 2461 | 2450, 2460, 2461 | |
USB-B-1 | USB Cable, Type A to Type B, 1m (3.3 ft) | 2450, 2460, 2461 | 2450, 2460, 2461 |
TRIGGERING AND CONTROL | ||||
Data Sheet | Accessory | Description | Ships in the box with | Works with |
2450-TLINK | DB-9 to Trigger Link Connector Adapter. | – | 2450, 2460, 2461 | |
8501-1 | Trigger Link Cable, DIN-to-DIN, 1m (3.3 ft) | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
8501-2 | Trigger Link Cable, DIN-to-DIN, 2m (6.6 ft) | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
8502 | Trigger Link to BNC Breakout Box | – | 2400, 2401, 2410, 2420, 2440 | |
8503 | Trigger Link Cable, DIN-to-Dual BNC, 1m (3.3ft) | – | 2400, 2401, 2410, 2420, 2440 | |
8505 | Make to 2-Female Y-DIN Cable for Trigger Link | – | 2400, 2401, 2410, 2420, 2440 | |
2499-DIGIO | Digital I/O Expander Assembly (not for Model 2401) | – | 2400, 2410, 2420, 2440 |
RACK MOUNT KITS | ||||
Data Sheet | Accessory | Description | Ships in the box with | Works with |
4299-8 | Single Fixed Rack Mount Kit | – | 2450, 2460, 2461 | |
4299-9 | Dual Fixed Rack Mount Kit | – | 2450, 2460, 2461 | |
4299-10 | Dual Fixed Rack Mount Kit. Mount one 2450/60/61 and one Series 26xxB | – | 2450, 2460, 2461 | |
4299-11 | Dual Fixed Rack Mount Kit. Mount one 2450/60/61 and one Series 2400, Series 2000, etc. | – | 2450, 2460, 2461 | |
2450-BenchKit | Ears and Handle for 2450/60/61-NFP-RACK and 2450/60/61-RACK models | – | 2450, 2460, 2461 | |
4288-1 | Single Fixed Rack Mount Kit | – | 2400, 2410, 2420, 2440 | |
4288-2 | Dual Fixed Rack Mount Kit | – | 2400, 2410, 2420, 2440 | |
4288-4 | Dual Fixed Rack Mount Kit | – | 2400, 2410, 2420, 2440 | |
4288-5 | Shelf type Side by Side Rack Mount Kit | – | 2400, 2410, 2420, 2440 | |
4288-9 | Dual Fixed Rack Mount Kit | – | 2400, 2410, 2420, 2440 |
TEST FIXTURES | ||||
Data Sheet | Accessory | Description | Ships in the box with | Works with |
8101-PIV | DC Test Fixture | – | 2450 |