Keithley 2461 High Current SourceMeter
- Interactive Digital SourceMeter
- Max Current: 10A DC
- Max Voltage: 100V
- DC Power: 100W/1000W
- Wideband Noise: <4.5mVrms typ.
- Sweep Types: Linear, Log, Dual Linear, Dual Log, Custom
For newer applications, Keithley recommends the 2450, 2460 and the 2470 SMU.
The Model 2461 High Current SourceMeter® Source Measure Unit (SMU) Instrument brings advanced Touch, Test, Invent® technology right to your fingertips. It combines an innovative graphical user interface (GUI) with capacitive touchscreen technology to make testing intuitive and minimize the learning curve to help engineers and scientists learn faster, work smarter, and invent easier.
With its 10A/1000W pulse current and 7A/100W DC current capability combined with dual 18-bit 1MS/s digitizers, the Model 2461 is optimized for characterizing and testing high power materials, devices, and modules, such as silicon carbide (SiC), gallium nitride (GaN), DC-DC converters, circuit protection devices, solar cells and panels, high brightness LEDs and lighting systems, electrochemical cells and batteries, and much more.
These new capabilities, combined with Keithley’s expertise in high precision, high accuracy SMU instruments, will make the Model 2461 a “go-to instrument” for high current sourcing and high speed measurement applications in the lab and in the rack for years to come.
- One tightly coupled instrument that combines the capabilities of analyzers, curve tracers, and I-V systems at a fraction of their cost
- Wide coverage up to 105V / 7A DC 100W, 100V / 10A Pulse 1000W max.
- Dual 1MS/s digitizers for fast sampling measurements
- Five-inch, high resolution capacitive touchscreen GUI
- 0.012% DCV accuracy with 6½-digit resolution
- Source and sink (4-quadrant) operation
- Four “Quickset” modes for fast setup and measurements
- Context-sensitive help function
- Front panel input banana jacks; rear panel mass termination screw connections
- SCPI and Test Script Processor (TSP®) programming modes
- Front-panel USB 2.0 memory I/O port for transferring data, test scripts, or test configurations
TEST LEADS AND PROBES | ||||
Data Sheet | Accessory | Description | Ships in the box with | Works with |
1754 | 2-wire Universal 10-Piece Test Lead Kit | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
5804 | Kelvin (4-Wire) Universal 10-Piece Test Lead Kit | – | 2450, 2400, 2401, 2410, 2420, 2440 | |
5805 | Kelvin (4-Wire) Spring-Loaded Probes | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
5806 | Kelvin Clip Lead Set | – | 2450, 2400, 2401, 2410, 2420, 2440 | |
5808 | Low Cost Single-pin Kelvin Probe Set | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
5809 | Low Cost Kelvin Clip Lead Set | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
8605 | High Performance Modular Test Leads | 2400, 2401, 2410, 2420, 2440 | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
8606 | High Performance Modular Probe Kit | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
8607 | 2-Wire, 1000V Banana Cables, 1m (3.3ft) | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
8608 | High Performance Clip Lead Set | 2450, 2460, 2461 | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 |
CABLES, CONNECTORS, ADAPTERS | ||||
Data Sheet | Accessory | Description | Ships in the box with | Works with |
237-ALG-2 | 3-slot Male Triax Connector to 3 Alligator Clips | – | 2450 | |
237-BAN-3A | Triax to Banana Plug | – | 2450 | |
2450-TRX-BAN | Triax to Banana Adapter. Converts the 4 Triax adapters on the rear panel to 5 banana jacks | – | 2450 | |
2460-BAN | Screw Terminal Connector to Banana Cable | – | 2460, 2461 | |
2460-KIT | Mating Mass Termination Connector | 2460, 2461 | 2460, 2461 | |
7078-TRX-* | 3-slot, Low Noise Triax Cable | – | 2450 | |
7078-TRX-GND | 3-slot Male Triax To BNC Adapter (guard removed) | – | 2450 | |
8607 | 2-wire, 1000V Banana Cables, 1m (3.3 ft) | – | 2450, 2460, 2461 | |
CA-18-1 | Shielded Dual Banana Cable, 1.2m (4 ft) | – | 2450, 2400, 2401, 2410, 2420, 2440 | |
CAP-31 | Protective Shield/Cap for 3-lug Triax Connectors | 2450 | ||
CS-1546 | Triax 3-lug Special Shorting Plug. Shorts center pin to outer shield | 2450 | ||
CS-1616-3 | Safety Interlock Mating Connector | 2450, 2460, 2461 | 2450, 2460, 2461 |
COMMUNICATION INTERFACES & CABLES | ||||
Data Sheet | Accessory | Description | Ships in the box with | Works with |
KPCI-488LPA | IEEE-488 Interface for PCI Bus | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
KUSB-488B | IEEE-488 USB-to-GPIB Interface Adapter | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
7007-1 | Shielded GPIB Cable, 1m (3.3 ft) | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
7007-2 | Shielded GPIB Cable, 1m (6.6 ft) | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
CA-180-3A | CAT5 Crossover Cable for TSP-Link/Ethernet | 2450, 2460, 2461 | 2450, 2460, 2461 | |
USB-B-1 | USB Cable, Type A to Type B, 1m (3.3 ft) | 2450, 2460, 2461 | 2450, 2460, 2461 |
TRIGGERING AND CONTROL | ||||
Data Sheet | Accessory | Description | Ships in the box with | Works with |
2450-TLINK | DB-9 to Trigger Link Connector Adapter. | – | 2450, 2460, 2461 | |
8501-1 | Trigger Link Cable, DIN-to-DIN, 1m (3.3 ft) | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
8501-2 | Trigger Link Cable, DIN-to-DIN, 2m (6.6 ft) | – | 2450, 2460, 2461, 2400, 2401, 2410, 2420, 2440 | |
8502 | Trigger Link to BNC Breakout Box | – | 2400, 2401, 2410, 2420, 2440 | |
8503 | Trigger Link Cable, DIN-to-Dual BNC, 1m (3.3ft) | – | 2400, 2401, 2410, 2420, 2440 | |
8505 | Make to 2-Female Y-DIN Cable for Trigger Link | – | 2400, 2401, 2410, 2420, 2440 | |
2499-DIGIO | Digital I/O Expander Assembly (not for Model 2401) | – | 2400, 2410, 2420, 2440 |
RACK MOUNT KITS | ||||
Data Sheet | Accessory | Description | Ships in the box with | Works with |
4299-8 | Single Fixed Rack Mount Kit | – | 2450, 2460, 2461 | |
4299-9 | Dual Fixed Rack Mount Kit | – | 2450, 2460, 2461 | |
4299-10 | Dual Fixed Rack Mount Kit. Mount one 2450/60/61 and one Series 26xxB | – | 2450, 2460, 2461 | |
4299-11 | Dual Fixed Rack Mount Kit. Mount one 2450/60/61 and one Series 2400, Series 2000, etc. | – | 2450, 2460, 2461 | |
2450-BenchKit | Ears and Handle for 2450/60/61-NFP-RACK and 2450/60/61-RACK models | – | 2450, 2460, 2461 | |
4288-1 | Single Fixed Rack Mount Kit | – | 2400, 2410, 2420, 2440 | |
4288-2 | Dual Fixed Rack Mount Kit | – | 2400, 2410, 2420, 2440 | |
4288-4 | Dual Fixed Rack Mount Kit | – | 2400, 2410, 2420, 2440 | |
4288-5 | Shelf type Side by Side Rack Mount Kit | – | 2400, 2410, 2420, 2440 | |
4288-9 | Dual Fixed Rack Mount Kit | – | 2400, 2410, 2420, 2440 |
TEST FIXTURES | ||||
Data Sheet | Accessory | Description | Ships in the box with | Works with |
8101-PIV | DC Test Fixture | – | 2450 |